SPRAY BOOTH SERVICES BY EUROTECNO SPRAY BOOTHS LTD
FOR ALL YOUR SPRAYBOOTH AND LEV SERVICING AND TESTING REQUIREMENTS
TEL. : 01202 897672
SERVICES & TESTING
SPRAY BOOTH SERVICING – CALL OUTS – SMOKE CLEARANCE TIME, EPA AND LEV TESTING
We carry out spray booth services and call outs/repairs on all makes of spray booth. We can supply and install filters and consumables, or service and test only. We can service automotive, industrial and aerospace paint booths.
Open back, enclosed, car booths, CV booths, Aerospace; We can service them all. Each full service includes EPA and smoke clearance testing at no extra charge. Preventative maintenance is always a priority.
With over 30 years of experience in the spraybooth industry, we carry out each service or repair thoroughly, quickly and efficiently so that you can be up and running again with the minimum of delay.
You need to have your spray booth tested annually to comply with legislation. You must also display a smoke clearance time on the front of the spray booth which must be tested each year.
We can test your spray booth and supply EPA and smoke clearance time tests. As part of an annual service, this testing is included at no extra charge, ensuring your paperwork is always up to date.
We also carry out separate LEV Testing from only £125+VAT for your dust, fume or welding extractors as well as for spraybooths and paint rooms.
ENERGY SAVING UPGRADES
YOU CAN SAVE OVER 60% OF YOUR ENERGY COSTS
POTENTIAL ENERGY SAVING*
SAVE £THOUSANDS EVERY YEAR
We can upgrade almost any spraybooth with an Inverter system that speed controls the motors and saves fuel and electricity for each and every job. We install a ‘faceless’ computer system and you just continue to your existing control panel. We can add an ‘economy’ switch to the control panel so that you can run the booth at less than flat-out-all-the-time!
Prices start at just £5,000.00 per booth, which can pay for itself in it’s first year!
When the booth is running in the spray mode but no spraying is taking place, the booth is just burning fuel and expelling it to atmosphere. The energy saving upgrade knows when you’re not spraying and reduces the airflows to a very low idle, saving huge amounts of electricity and fuel, all automatically. As soon as you start to spray the system ramps up the fans to full speed again.
Heat recovery ductwork pre-heats the input air by energy in the exhaust ducting, further cutting fuel bills. Add this to efficient bake cycle recycle systems and the savings are huge. Many older booths can be upgraded, resulting in spray booths that match new systems for energy efficiency.
Send us a message or call us on 0845 2575 889 for more information.
*Based on 20 jobs per week, 48 weeks per year. Each job includes 30 minute bake + 10 minute flash off and cool down cycles. 24,000 m3/h spraybooth with 240,000KCal/h heat exchanger, gas fired. Comparison is for the same booth with and without the energy saving inverter upgrade. Full details available upon request.
FILTERS AND PARTS
FILTERS • BELTS • MOTORS • PULLEYS • CONTROL PANELS • SPECIALIST PARTS
We stock a comprehensive range of spray booth filters which are available on a roll or cut to size.
We also supply a large range of spray booth consumables and spare parts, including belts, pulleys, bearings, motors, damper motors and temperature controllers. We can supply just about any spray booth or paint booth part you may require.
Please call us on 01202 897672 or 0845 2575889 for more details.
NEW SPRAYBOOTHS • USED SPRAY BOOTH INSTALLATIONS
WE CAN INSTALL YOUR SPRAY BOOTH
Moving? Acquired a second hand spraybooth?
We can dismantle and re-assemble and commission it for you or just assist in the ‘fiddly-bits’, commissioning or setting up. During re-installation we can refurbish the spray booth and upgrade it’s performance and efficiency
MESSAGE, WRITE, PHONE OR CONTACT US VIA SOCIAL MEDIA
SEND US A MESSAGE
Eurotecno Spray Booths Ltd.
Unit A3 Stirling Business Park
6 Nimrod Way
Dorset BH21 7SH